bing tracking image

Gas Struts Installation And Review Videos


Atlas Lift Gas Strut Installation - 2002 Chevrolet Blazer- Video

Atlas Lift Gas Strut Installation - 2002 Chevrolet Blazer

Hi, Matt with etrailer. And today we're talking about our Atlas Custom Fit Gas Struts on our 2002 Chevrolet Blazer. Now this is gonna be able to fit a lot of different vehicles too. What I recommend doing though, is just plugging in your vehicle's information into our fit guide to find which one's gonna be the best fit for you and fit you correctly. But the main appeal to this is this is gonna be something that's gonna make your life just a little bit easier because when you are using these, a lot of times if you don't wanna push it up all the way, or if yours are kind of wearing out on you, they're gonna not hold themselves up. And if they're not hold holding themselves up and you need to reach into the back of your car, that's gonna be kind of hard to do because that's constantly gonna be applying pressure to the top of you. more


Watch Video

4/22/2024 12:34:35 PM



Atlas Liftgate Lift Support Installation - 2015 Toyota 4Runner- Video

Atlas Liftgate Lift Support Installation - 2015 Toyota 4Runner

Hi everyone. Aidan here with etrailer.com. Today we're taking a look at and showing you how to install these lift gate lift supports from Atlas Lift on our 2015 Toyota 4Runner. They are sold individually but we recommend installing them in pairs. If you are replacing an old worn out one and you only replace one, chances are the other one's gonna be a little bit uneven and it's just better to have two new ones to ensure everything's moving the same. If you have a nitride-coated steel shaft, that's gonna be corrosion resistant and the nylon ball and socket joints at the end are gonna connect to OEM factory fittings. more


Watch Video

11/2/2022 11:13:33 AM



Atlas Lift Hood Lift Support Installation - 2014 Ram 2500- Video

Atlas Lift Hood Lift Support Installation - 2014 Ram 2500

What's up everybody. Adam here with etrailer. Today we're gonna be taking a look at the Atlas Lift Gas Strut for our 2014 Ram 2500. Once our struts start to wear out the hood doesn't really wanna stay open. You don't wanna be that guy that's sitting there propping it up whenever you're working on your motor. So by doing this, it's gonna be pretty much a mimic of your OEM. more


Watch Video

4/7/2022 11:03:41 AM



Atlas Lift Hood Lift Support Installation - 2010 Ford F-250 Super Duty- Video

Atlas Lift Hood Lift Support Installation - 2010 Ford F-250 Super Duty

Today we have a 2010 Ford F-250, and we're gonna be taking a look at the Atlas Lift Gas Strut. So this's gonna be for your hood. So what we wanna do if we're replacing this, it's probably not staying up on its own. So I'm using something to prop it up, so when I pop this thing off, it's not gonna fall on me, and also just so to keep it up so we can replace it. One, kinda get an idea of how it's sitting. So right now we have the larger end of the strut on top, and then the rod going through here on the bottom. more


Watch Video

4/7/2022 11:02:25 AM



Atlas Lift Rear Window Glass Lift Support Installation - 2001 Chevrolet Tahoe- Video

Atlas Lift Rear Window Glass Lift Support Installation - 2001 Chevrolet Tahoe

Today we're gonna be taking a look at the Atlas lift gas struts on our 2001 Chevrolet Tahoe. So these are gonna be for your rear hatches, some hoods, but also the rear glass. So the reason why we're replacing it today on my vehicle is, it's not do anything. Doesn't stay up. And that's annoying, especially if you need to grab something out of the back, or need to do some maintenance underneath the hood. So be sure to use our fit guide, put your vehicle in, it's at the center, at the top of our website. more


Watch Video

4/7/2022 10:59:29 AM



Taylor Made Boat Hatch Marine Gas Struts Installation- Video

Taylor Made Boat Hatch Marine Gas Struts Installation

Shane: Hey everyone. Shane here with etrailer.com.Today I have a 2007 Fleetwood Bounder motor home, and I'm going to show you how to install the tailor-made gas strut. These struts are going to be designed for your basement doors. Maybe you have a boat with a flip up lid. These are great replacements for any of those that are wore out. It's going to make it a lot easier when you're lifting those things up. more


Watch Video

9/14/2020 9:37:54 AM



Taylor Made Boat Hatches Marine Gas Struts Installation - 2005 K-Z New Vision- Video

Taylor Made Boat Hatches Marine Gas Struts Installation - 2005 K-Z New Vision

Hey guys, Shane here with Etrailer.com. Today I have a 2005 KZ New Vision fifth wheel, and I'm going to be replacing the gas shocks on our doors. All the ones we're wore out and it's just not holding up the door anymore. It makes it kind of inconvenient when you're trying to load or unload anything from down in your baggage area and have to hold the door up with one hand and try and get stuff out with the other. Replacing them is going to be very simple. They're going to fit right in place of your old factory ones.Before we start our installation, I'm going to show you why we're replacing our shocks. more


Watch Video

4/7/2020 4:22:51 PM



  1